Service Manual (KLZ1000C) — page 747 of 762

Text on this page

APPENDIX 18-49
Cable, Wire, and Hose Routing
  1. Water Hoses
  2. Install the clamps as shown.
  3. Align the green paint mark of the water hose with the projection on the water pipe.
  4. Install the water hose until the raised portion of the water pipe.
  5. Install the water hose so that the white paint mark faces upward.
  6. Align the green paint mark of the water hose with the line on the thermostat cover.
  7. Install the water hose until the raised portion of the thermostat cover.
  8. Breather Hose
  9. Install the breather hose so that the white paint mark faces rearward.
 10. Viewed from A
 11. Air Bleeder Hose
 12. Viewed from B