Service Manual — page 709 of 715

Text on this page

APPENDIX 17-37
Cable, Wire, and Hose Routing
  1. Run the purge hose to the upside of the heat insulation rubber plate.
  2. Green Paint (Purge Hose)
  3. Heat Insulation Rubber Plate
  4. Run the purge hose to the upside of the stick coil #1 lead.
  5. Run the purge hose under the stick coil #2 lead.
  6. Install the clamp so that its tab faces downward.
  7. Stick Coil #2 Lead
  8. Stick Coil #1 Lead